Open, unsymmetrical 50 Ω stripline for automotive immunity testing of components complies to the requirements of ISO 11452-5. The stripline can be used to create TEM-waves up to max. 220 MHz. The fieldstrength distribution at TEM-mode operation inside the stripline is very homogenous. The stripline can also be used above 220 MHz, in this case higher modes do exist, which offer a location dependant fieldstrength characteristics.
Wooden frame construction (top view, side view) and termination required.
| Material: | Aluminium |
| Nominal Frequency Range (TEM-Mode): | DC – 220 MHz |
| Usable Frequency Range (TEM and higher modes): | DC – 1000 MHz |
| Nominal Impedance: | 50 Ω |
| Standing Wave Ratio SWR typical: | < 1.5 (f < 220 MHz); < 2 (f > 220 MHz) |
| Voltage / Fieldstrength relation: | 1 V = 6.67 V/m; 1 V/m = 0.15 V; 16.5 dB/m |
| Max. Input Power (with suitable high power termination): | 1 kW (intermitt.); 500 W (cont.) |
| Connector: | N-female |
| Stripline inner dimensions: | 740 x 150 x 2500 mm |
| Width x Length x Thickness: | 1500 x 4300 x 200 mm |