Calibration-Pulse Generator acc. CISPR 16 for Band A, B, C, D. To calibrate the pulse response of EMI receivers. Pulse repetition frequency main generator 0.1 – 200 Hz (aux. generator up to 1 MHz) with IEEE-488 Interface. Datasheet IGUU 2918…
The comb-generator SG 9302 D produces a frequency spectrum consisting of lines with 100 MHz spacing up to 18 GHz. In combination with an antenna it can be used as an emission source for testing open area test sites, anechoic…
The comb generator SG 9303 is battery powered. It provides a frequency comb up to more than 8 GHz. The spacing between the spectral lines can be switched between 10 MHz and 100 MHz. A quartz crystal provides accurate frequencies.…
The comb-generator SG 9302 C produces a frequency spectrum consisting of lines with 100 MHz spacing up to 18 GHz. In combination with an antenna it can be used as an emission source for testing open area test sites, anechoic…
Small, powerful avalanche comb generator for operation without cables independent of position. Easy generation of calibration field strengths by direct connection to the antenna connector. Pulse frequencies 100 Hz, 1 kHz, 10 kHz, 100 kHz and 1 MHz to solve…
High Power Pulse Generator for EMI / RFI / EMC – Applications Pulse Repetition Frequency 300 Hz weighted CISPR Level 80 dbµV (Quasipeak, 120 kHz IF-BW) Broad band signal source up to 300 (1000) MHz w. 0.5 ns Pulses of…