Low noise low power wideband amplifier for increasing sensitivity at fieldstrength-measurements and for general attenuation measurements up to 28 GHz. A power supply with 12 V / 300 mA DC (e.g. optional AC/DC adaptor, laboratory power supply, rechargeable battery) is required for operation.
The amplifier Input comes with SMA-female connectors. A coaxial microwave cable (with SMA-male connectors) of 0.5 m length is supplied to connect the Antenna with the BBV 9719 amplifier. The amplifier is equipped with a female 3/8″ camera thread to be connected to a mast, e.g. to AM 9144.
| Frequency range (nominal): | 18 – 26.5 GHz |
| Usable frequency range: | 12 – 28 GHz |
| Gain: | typ. 33 dB +/-2 dB |
| Gain min.: | 30 dB |
| SWR typ.: | <2 |
| Max. input power: | -20 dBm (87 dBµV) |
| 1 dB Compression (at output): | >+17 dBm (124 dBµV) |
| Noise Figure: | 3.5 dB |
| Connectors: | 50 Ω SMA |
| Supply Voltage: | 12 V – 15 V DC |
| Current Consumption: | 250-300 mA |
| Power Supply via female Banana sockets: | 4 mm |
| Dimensions: | 210 x 100 x 60 mm |
| Weight: | 150 g |
Including short cable with SMA plugs to connect the BBV 9719 with the antenna (for example BBHA 9170).
Datasheet BBV 9719