CS-50 is a resistive, unsymmetrical two way splitter with an impedance of 50 Ω
It is part of the measurement setup according to EN 50561-1:2012 which is explained in chapter 9.2.Figure 4 shows the measurement setup with the available components.
The unsymmetrical splitter CS-50 belongs to a series of measurement equipment to measure power line communication devices.
This splitter is built in a resistive way. Resistors made with tight tolerances and temperature stable have been used. Thus the device can be used for a wide frequency range.
The CS-50 has a very flat frequency response of typically less than 0.1 dB and can be used up to above 50 MHz. The ports have identical properties and can be used in any direction.
| Frequency range: | DC … 30 MHz |
| Usable frequency range: | DC … >50 MHz |
| Insertion loss: | 6 dB ±0.2 dB |
| Frequency response: | <±0.1 dB |
| Nominal Impedance: | 50 Ω |
| Max. Input power: | 1 W |
| VSWR: | < 1.1:1 @ 30 MHz |
| Housing material: | Aluminium |
| Housing dimensions: | 125 x 104 x 50 mm |
| Weight: | ca. 280 g |
| Terminals: | BNC-female |
| Ground connectors: | Bottom of case and 4 mm laboratory jack |