The impedance stabilization network ISN 303417 is used for the measurement of conducted disturbances using a current clamp on WPT (wireless power transmission) systems. It is especially designed according to ETSI EN 303417 chapter 6.2.4. For common mode signals the ISN presents an impedance of 150 Ω. For differential signals, the impedance of the ISN is sufficiently high in order not to bias the operation of the WPT.
| Operating frequency range: | 15 kHz … 30 MHz |
| Frequency range for measurement of common mode disturbances according to ETSI EN 303417: | 1 MHz … 30 MHz |
| Common mode impedance: | 150 Ω ± 20 Ω |
| Max. input voltage (AC) | 50 Vrms |
| Max. input voltage (DC) | 200 V |
| Max. cont. power: | 5 W |
| Housing material: | Aluminium |
| L1, L2 Connectors: | Safety laboratory jacks, 4 mm |
| GND Connector: | 4 mm laboratory jack |
| Dimensions: | 130 mm x 105 mm x 55 mm |
| Weight: | approx. 500 g |
Datasheet ISN 303417
