The ISN CAT5 8158 allows to perform common mode disturbance voltage measurements on unshielded twisted pairs (UTP) or communication ports with 2, 4, 6 or 8 wires according to CISPR 22, CISPR 32. The Equipment under Test (EuT) or Auxiliary Equipment (AE) can be connected using the RJ-45 sockets. The pin assignment follows EIA/TIA-T568A/B. The electrical circuit of CAT5 8158 is designed according to CISPR 22, figure D.3, CISPR 32, figure G.3.
The ISN-device CAT5 8158 provides an longitudinal conversion loss of typically 65 dB at the EuT port and allows to measure CAT5 devices. There are two further ISN available for measurements of CAT6 devices (NTFM 8158) and CAT3 devices (CAT3 8158) respectively.
In addition to the measurement of disturbance voltage the NTFM 8158 allows to perform measurements of conducted immunity acc. IEC 61000-4-6 up to 80 MH. An additional 50 Ω to 150 Ω adapter (EAB8 50-150) is required. This adapter can easily be mounted to the CAT5 8158 and is available as an option.
The specification of CAT5 8158 is fully compliant to CISPR 22, CISPR 32 and verified according methods described in CISPR 16 1 2, Annex E.
