The CALIBRATION KIT 8131 is used to cali-brate the NTFM 8131 A. It is not suitable for calibrating the previous version NTFM 8131. The following measurands can be measured:
- LCL (Longitudinal Conversion Loss) in accordance with ITU-T recommendations G.117 and O.9 as well as CISPR 16 and CISPR 22.
- Transmission differential mode
- Magnitude and phase of the common mode impedance at EuT-Port
- RF-isolation between AE and BNC-port in common mode
- VDF (voltage division factor) common mode
| Frequency Range: | 9kHz … 30 MHz |
| Longitudinal Conversion Loss | >100 dB @ 150 kHz |
| (LCL) with 100 Ω termination | >70 dB @ 30 MHz |
| Connector to VNA: | BNC socket 50 Ω |
| Connectors balanced ports and ground: | 4 mm sockets |
| Housing material: | POM |
| Storage- and operating temperature: | Max. 45° C |
| Weight: | ca. 1120 g |
Datasheet CALIBRATION KIT 8131
Scope of delivery:
| Transport and Storage Case | 1x |
| LCL Balun PB31 | 2x |
| 0dB LCL Reference | 1x |
| 60dB LCL Reference | 1x |
| DM-100R-M | 1x |
| BNC-100R-CM-M | 2x |
| BNC-0R-CM-M | 1x |
| CON F-F | 3x |
| 10dB Attenuator | 2x |
| BNC 50R | 1x |
| SHORT-3-M | 1x |
| SHORT-2-M | 1x |
| SHORT-3-F | 1x |
| BNC F-F Connector | 1x |
| Calibration Certificate | 1x |
