The Calibration Jig CAL EMCL can be used to calibrate the coupling factor and the impedance Zin and the decoupling factor of the EM Coupling Clamp EMCL 6146 as well as for test level setting acc. to IEC / EN 61000-4-6 (Immunity to conducted disturbances, induced by radio-frequency fields). Further, the decoupling clamp FTC 101 B can be characterized (Zin, decoupling a).
| Usable Frequency Range: | 10 kHz … 1000 MHz |
| Frequency Range, normative: | 150 kHz … 80 MHz |
| Standards: | EN / IEC 61000-4-6 |
| Nominal Impedance Zref‘: | 247.6 Ω |
| Impedance range Zref‘: | ~235 … 258 Ω |
| Center height of the inner conductor above ground: | ~62 +/- 12 mm |
| Diameter inner conductor: | 4 mm |
| Connector: | N-female |
| Length x Width x Height: | 1066 x 500 x 133 mm |
| Material: | Aluminium |
| Weight: | 5.8 kg |
