The electromagnet AGEM 5520 can generate extremely high magnetic field strengths of up to 2.2 Tesla for experimental applications. Depending on the required magnetic flux density and the equipment under test volume, the air gap can be adjusted continuously. The magnet poles have a conical shape near the test volume to improve accessibility and optimize the achievable magnetic flux density. The locking of the magnet poles is achieved using hand levers. Their position relative to their thread can be changed if needed. To simplify the air gap spacing adjustment, plastic spacers are supplied, providing easy and repeatable settings of 6 different spacings, from 15 mm to 40 mm in 5 mm steps.
| Number of turns (per Coil): | 2000 |
| Resistance at Room Temperature: | 14 Ohm |
| Maximum permissible Resistanceduring Use: | 16 Ohm |
| Maximum Coil Current: | 20 A 1 min.; 15 A 3 min.; 10 A 6 min.; 5 A > 20 min.; |
| Air Gap between the Poles: | 0…95 mm |
| Maximum Magnetic Flux Density: | > 2.2 T |
| Coil diameter: | 335 mm |
| Pole Diameter at EuT: | 30 mm |
| Pole Diameter: | 75 mm |
| Mechanical Dimensions Base Plate: | 380 x 238 x 22 mm |
| Total Height: | 410 mm |
| Pole Height above Base Plate: | 182.5 mm |
| Terminals: | 4 mm female with universal wire fixture |
| Inductance (Pair of Coils): | 1.89 H / 10 Hz; 1.085 H / 20 Hz; 0.55 H / 50 Hz; 0.4 H / 100 Hz; |
| Recommended DC Power Supply for serial coil operation: | 250 V / 20 A |
| Remanent Flux Density: | typ. 5-8 mT |
| Weight: | 118 kg |