CDNE M3
CDNE with tight tolerances for CISPR 16-1-2/ EN 55015 emission measurements with 3 mains conductors.
CDNE
CDNE for emission measurement on luminaries acc. EN 55015. For measurements on DuTs without PE one has to use the CDNE M2. For measurements using PE,N and L the CDNE M3 has to be used.
CDNE M2
CDNE with tight tolerances for CISPR 16-1-2/ EN 55015 emission measurements with 2 mains conductors can also be used as CDNE AF2.
SR100-6W – 50 Ω to 150 Ω Adapter
Frequency range (nominal): DC - 500 MHz
The SR100-6W is an adapter for the calibration of a CDN (e.g. ISN S1, ISNS8) or a CDNE. Therefore it matches the 50 Ω measurement port to the 150 Ω system. A low inductance resistor of 100Ω is connected between…