The SR100-6W is an adapter for the calibration of a CDN (e.g. ISN S1, ISNS8) or a CDNE. Therefore it matches the 50 Ω measurement port to the 150 Ω system.
A low inductance resistor of 100Ω is connected between the inner conductor of the N connector and the 4mm banana jack. The construction is according to the picture 7 of the standard EN 61000-4-6.
| Frequency Range: | DC … 500 MHz |
| Max. Power: | 6 W |
| Line Resistance: | 100 Ω |
| Output: | 4 mm Banana jack |
| Insertion Loss 2xSR100-6W in series: | 9.5 dB +/- 0.5 dB |
| Input Connector: | BNC 50 Ω |
| Weight: | 340 g |
| Dimensions W x H x D: | 105 mm x 64 mm x 70 mm |
| Reference Plane: | 100 mm x 100 mm x 3 mm |
| Grounding: | Case bottom |
| According to the Standards: | EN 61000-4-6 EN 55015 CISPR 15 CISPR 16-1-x CISPR 16-2-x |
