The Calibration Jig CAL 9222 B is used to measure the transducer of the Capacitive Voltage Probe CVP 9222. For calibrations of the Capacitive Voltage Probe there is additional equipment required, e.g. a network analyser, a spectrum analyser with tracking generator or a signal generator with a receiver. The use of the calibration fixture is described in detail in CISPR 16-1-2 Annex G. The Calibration Fixture is equipped with N female connectors at each side and can be adjusted in height.
| Connector: | 2x N female |
| Material: | Aluminium |
| Weight: | 1.25 kg |
| Dimensions | 405 x 120 x 135…170 mm |
| Height Inner Conductor | 100…135 mm |
| Diameter Inner Conductor | 5 mm; 8 mm; 10 mm |
