Mast Adapters by Schwarzbeck Mess-Elektronik are essential components designed to securely mount antennas and measurement equipment to masts. Engineered for stability and ease of installation, these adapters ensure precise alignment and optimal performance in various testing and measurement applications. Ideal for professional use, they enhance the reliability and accuracy of electromagnetic compatibility (EMC) testing setups.
The mast adapter AA 9202 is used together with Antenna Mast AM 9144 for mounting of Antennas with 22 mm tube. Another possibility is to use the adaptor with a common camera tripod with 1/4″ or 3/8″ thread. The polarisation can be changed continuously by turning the antenna tube inside the adapter.
The mast adapter AA 9202-38 is used together with Antenna Mast AM 9144 for mounting of antennas with 38 mm tube. Another possibility is to use the adapter with a common camera tripod with 1/4″ thread. The polarisation can be changed continuously by turning the antenna tube inside the adapter.
Adapter with holder and clamp for 22mm tube and 1/4 inch threaded screw, suitable e.g. for attaching dedicated preamplifiers to antenna tubes. Suitable e.g. for BBV 9722.
The polarisation swivel fixture PDG 9211 allows to change the polarisation of larger horn antennas by a single person easily. With the four locking points the antenna can snap in increments of 90° angles to horizontal or vertical polarisation. The…
The non-metallic mast adaptor AA 9202 POM is used together with the Antenna Mast AM 9144 for mounting most lightweight antenna models with a 22 mm tube. An other possibility is to use the adaptor with a common tripod with…
The AA 9203 mast adapter offers versatile mounting for antennas with 22 mm tubes, is used together with the AM 9144 mast and compatible with standard camera tripods (1/4″ and 3/8″ threads).
The polarization can be changed continuously by turning the antenna tube inside the adaptor. The elevation (angle between horizon and 22 mm tube) may be varied continuously.
Designed for antennas with a 22 mm tube and indexing ring, the RA 9215 enables quick and accurate switching between horizontal and vertical polarization. Compatible with standard tripod threads, it securely locks antennas in place using a spring-loaded indexing mechanism for precise 90° adjustments - ideal for fast, repeatable polarization changes in test environments.
The Orthogonal Swivel Adapter AA 9205 was designed for convenient positioning of lightweight antennas in three perpendicular directions. A typical application is the determination of the E-field magnitude |E|, which requires the measurement of the x-, y- and z-components of the field strength.
The mast adapter AA 9209 is used together with the tripod AM 9144 for mounting antennas with 22 mm tube. The polarization can be changed continuously by turning the antenna tube inside the adaptor. Also, allows to change the polarization without any height offset.
Adapter to convert a 3/8" female thread to 22 mm tube with indexing ring. Perfectly suited for small antennas.
Mast Adapter (swivel, 90° vertical/horizontal polarisation for AM 9144), for VULP 9118 D,E,F,G and VUSLP 9111 E only
The Polarisation Swivel Adapter for VUSLP 9111 F serves to mount the antenna to a vertical mast tube with 50 mm diameter. Furthermore, the polarisation of the antenna can be set and locked in three positions (horizontal, 45°, vertical). No tools are required to swivel the polarisation.
Positioner for light weight antennas like SBA 9113 with 420 NJ. The positioner consists of the following parts: 1 piece of glass fiber tube 22 mm thick, 1000 mm long, an adapter AA 9203 is mounted to the tube. The…
R&S Flange Adapter for Schwarzbeck antenna with 22 mm tube.
Twin adapter to mount two antennas equipped with 22 mm diameter tube. The TWAD 9220 allows to position the antennas in a broad combination of distances and angles.
Adapter to convert the R&S Aluminium Flange into 22 mm tube with indexing ring. Many antennas made by Rohde & Schwarz are equipped with an aluminium flange. Mast systems using the 22 mm tube of an antenna can hold such…
Adapter for light horn antennas of various manufacturers with 50 mm bolt circle to 22 mm tube with indexing ring. The adapter ETSA 9227 is suitable for small, lightweight antennas up to 3 kg.
The pneumatic polarisation swivel adapter PPS 9208 is used to change the polarisation of Antennas with 22 mm tube remote controlled. Compressed air with a recommended pressure of 5 to 6 bar is required. Higher air pressure should be reduced…
The SWHA 9204 antenna handle was designed to perform the so called swivel method. The handle is drilled with a hole to accept the 22 mm antenna tube. Further there are two cable guide holes for the most common cable…
Adapter for Schwarzbeck antennas with 22 mm tube on EMCO mast. Dimensions: 65 x 65 x 170 mm Mounting 22mm on both sides Weight: ca. 300 g Datasheet EA 9207
TA 9204 Thread Adapter with 3/8″ female and 1/4″ male threads. Mainly for American antenna brands. TA 9205 Thread Adapter with 1/4″ female and 3/8″ male threads. (For camera tripods, not for AM 9144) TA 9206 Thread Adapter with 3/8″…