STLP 9128 C – Stacked Log Periodic Antenna

Schwarzbeck STLP 9128 C – Stacked Logarithmic Periodic Antenna
Schwarzbeck STLP 9128 C – Stacked Logarithmic Periodic Antenna

STLP 9128 C - Stacked Log Periodic Antenna
STLP 9128 C – Stacked Log. Per. Antenna
STLP 9128 C - Antenna Factor
STLP 9128 C – Antenna Factor

STLP 9128 C - Isotropic Gain
STLP 9128 C – Isotropic Gain
STLP 9128 C by Schwarzbeck Mess-Elektronik – Linear polarized Stacked Logarithmic Periodic Broadband Antenna with N- or 7/16-connector for Receive and Transmit Applications.
Main Application: Generation of defined fieldstrength levels for immunity testing.

The stacked Logarithmic Periodic Dipole Antenna consists of two ordinary Log.-Per. structures. The excellent characteristics (flat gain over a large bandwidth, low SWR) of the ordinary Log.-Per. designs could be maintained using the stacked LP design. The stacked design helps to focus the directional pattern of the H-plane somewhat, resulting in a typical gain improvement of ca. 2-3 dB compared to an ordinary LPDA. This is especially important for immunity testing, where a maximum fieldstrength and a good field uniformity is required. The beamwidth in the E-plane and the H-plane are nearly identical, providing an optimised illumination of the EuT with minimised ground reflection influence. Further the STLP 9128 C has an excellent cross-polar rejection.

Frequency Range:200-1500 MHz
Usable Frequency Range:150-4000 MHz
Polarisation:linear
Pattern Type:directional
Material:Aluminium
Max Power (7/16):2 kW (const.);
3 kW (intermitt.)
Max Power (N):1 kW (const.);
2 kW (intermitt.)
Connector:Type 7/16 female
Type N female
Impedance:50 Ohms nominal
Length:890 mm
Width:930 mm
Height940 mm
Weight:4.6 kg
Mounting:22 mm diameter tube

Datasheet STLP 9128 C
Radiation Pattern
Short Measuring Distances
VSWR
Assembly of STLP Antennas

Options:

  • with 7/16-connector 3 kW