VAMP 9243 B – Vertical Active Monopole Antenna

VAMP 9243 B - Low Noise Active Vertical Monopole Antenna
VAMP 9243 B – Low Noise Active Vertical Monopole Antenna

VAMP 9243 B antenna and the ground plane (GP f. 9243), mounted on the AM 9144 mast system.
VAMP 9243 B antenna and the groundplane mounted on the AM 9144 mast system.
20 dB Divider for the VAMP 9243 B Rod Antenna
20 dB Divider for the VAMP 9243 B Rod Antenna

Calibration Adapter for Rod Antennas VAMP 9243 / 9243 B
Calibration Adapter for Rod Antennas VAMP 9243 / 9243 B
The VAMP 9243 B is a low noise, active, vertical monopole antenna which can be used to measure the electric fields in the frequency range between 9 kHz and 30 MHz, according to CISPR 16-1-4, CISPR 25, MIL-STD-461, ANSI C63.5, IEE 291 and many other standards. The antenna can be equipped with several accessories like groundplanes, calibration adapters, voltage divider and bonding kit according to MIL-STD-461F standard.

Nominal Frequency Range:9 kHz … 30 MHz
Useable Frequency Range:9 kHz … 60 MHz
Antenna factor:10 dB/m ±1 dB
Nominal Output Impedance:50 Ohm
VSWR:< 2, typ. < 1.5
Output-Connector:BNC female
Output return loss:typ. >15 dB
Fieldstrength Range (1 m Rod):max. 125 dBµV/m
Fieldstrength Range (0.5 m Rod):max. 131 dBµV/m
Power supply:8 NiMH Cells AA
Suggested battery charger:ACS 110
Length of the rod:2x 500 mm;
1x 40 mm
Diameter of the rod:16 mm
Mounting thread:M 8
Material:Aluminium
Housing Dimensions:80 x 80 x 145 mm
Top plate:220 mm x 120 mm
Mounting threads:¼“ and 3/8“
Weight:~ 1 kg

Datasheet VAMP 9243 B

Options:

  • Opt. GP: Aluminium-Groundplane
  • Opt. VT: 20 dB plug in divider to measure high field strength
    Opt. VT
  • Opt. CA 9243 B: Calibration Adapter for VAMP 9243 B
    Opt. CA 9243 B
  • Opt. MIL461F bonding kit: Bonding kit for VAMP 9243 acc. MIL-STD-461F consisting of a BNC cable double shielded ca. 70 cm, with braid current blocking ferrite in the center, elbow aluminium angle with BNC bulkhead adapter.
    Opt. MIL 461F Bonding Kit