Empowering innovation in EMC measurement technology for over 70 years
Since our founding over seven decades ago, Schwarzbeck - Mess-Elektronik has been at the forefront of electromagnetic compatibility (EMC) measurement technology. Our commitment to innovation and excellence has made us a trusted partner for industries and researchers worldwide.
Our new products
VHFB 8801 – Balanced VHF-LISN
The VHF-LISN serves as a defined RF-termination device at the EuT’s mains cable during the radiated disturbance measurement. There are two VHF-LISN types available: the balanced VHF-LISN (VHFB 8801) and the unbalanced VHF-LISN (VHFU 8802), which can be used as an alternative to the CMAD (common mode absorption device). The balanced VHF-LISN presents the same impedance to each terminal of the EUT’s AC mains power cable (symmetrical), resulting in a balanced load. This device complies with the standard CISPR 16-1-4 / Ed. 5
CDN M5PE 250A 1000V – Coupling Decoupling Network
The CDN M5PE 250A 1000V is a high-performance coupling/decoupling network for conducted common mode immunity testing, compliant with IEC 61000-4-6 Annex D.2.
The CDN M5PE 250A 1000V is intended to inject common mode disturbance signals into power supply or mains lines (unscreened) in the frequency range from 150 kHz to 80 MHz.
Each CDN comes with an individual calibration certificate. Optional calibration adapters and accessories are available for extended functionality.
NNBM DO-160-800 – Single path vehicle AMN (LISN)
The NNBM DO-160-800 AMN is used to measure interference voltage within the 0.009–400 MHz HF-VHF range. It meets DO-160 and DEF-STAN-59 standards and supports up to 700 A continuous current.
HA 9252-4067 – Standard Horn Antenna
Linear polarized standard gain horn antenna 40 - 67 GHz with coaxial connector 1.85mm.
EFS 9221 – Active Biconical Broadband Antenna
The EFS 9221 is an active, symmetrical biconical antenna with a wide frequency range 9 kHz - 1 GHz and a remarkable flat frequency response.
It allows precise fieldstrength measurements, thanks to a very high common mode rejection. Battery-powered and portable.
SBB 0110 – Microwave Biconical Antenna
The SBB 0110 is a microwave biconical dipole antenna for 1–10 GHz with an omnidirectional H-plane and 8-shaped E-plane patterns. Typical applications are the evaluation of test site performance e.g. according to CISPR 16-1-4, ANSI C 63.25, and CMFTD-method.
EMCL 6146 – EM Coupling Clamp
The EMCL 6146 Coupling Clamp is used for conducted immunity testing acc. to IEC/EN 61000-4-6. It combines several coupling methods to achieve a good coupling efficiency and a wide frequency range from 10 kHz to 1000 MHz.
FESP 5133-360 – Field Monitoring Coil
The FESP 5133-360 Loop Sensor monitors magnetic fields from 10 Hz to 160 kHz using 50 Ω equipment. It comes with 360 RF-litz wire turns, the low frequency resistance is 45 Ω. A shield helps to supress electric fields. Mounting is via a 1/4" camera thread.
CDT 3200 – Coupling / Decoupling Transformer
The CDT 3200 transformer used for testing according to MIL STD 461 (CS101, CS106, CS109), DO 160 (Section 16 and Section 18), ISO 11452-10, Chrysler CS 11809, Ford FMC 1278, DaimlerChrysler DC-1061, EMC-CS-2010JLR V1.1, MIL-STD-704, Mitsubishi ES-X82115, SAE J1113-2, Tata TST/TS/WI/257.
BBV 9744 B – Broadband Preamplifier
The BBV 9744 B delivers high gain and low noise for superior signal clarity, now with an extended frequency range up to 8 GHz. Enhanced input protection, a more reliable power connection, and a compact, lightweight design ensure robust performance and seamless integration.